HP Officejet 4650 Setup and Install

HP OfficeJet 4650 is a multifunction printer capable of printing, scanning, copying, and faxing. It also supports duplex and AirPrint features. If you want to set up your HP Officejet 4650 printer for the first time, consider the steps below.


Initially, take out the printer from the product box and then connect the power cable. Set the control panel preferences to operate the printer and load enough paper. Once you have loaded the paper and adjusted the edge guides, install the ink cartridges carefully one by one. With this, the hardware setup of the printer will be done and you can install the printer software on your computer. 


Now, start by following the detailed procedure given here. First, unpack the printer. The printer accessories may vary depending on your country/region. Check the package to verify the items shipped in the box. Remove the printer from the packaging box and remove all the tapes, stickers, and packing materials from the printer. Now, remove the printer from the packaging box. Remove all the tapes, covers, and packing materials from the outside of the printer. Remove the sticker on the control panel of the printer. 


Gently hold the handles on both sides of the printer. Lift the ink cartridge access door and make sure that it locks into place. Now, remove all the tapes and packing material from the inside. Close the ink cartridge access door, then raise the input tray door. Extend the paper tray and remove the packing tape. Close the input paper tray and make sure the packing materials are recycled.


Now, you can connect the printer to a power source. Turn on the printer and set the required preferences. If you are connecting the printer and computer using a USB cable, you can connect them at the time of software installation when prompted. As of now, select your language and country/region. When prompted for confirmation, select Yes. Set the date and time and select Yes to confirm your choice.


Open the input tray to load the paper. You can load plain U.S. letter or A4 paper into the input tray. Extend the paper output tray. Adjust the paper width guides by sliding them outwards. Align the paper stack and fan them well before loading in the input tray. 

Insert the ink cartridges carefully one by one and close the ink cartridges. Raise the ink cartridge access door until it locks into place. The carriage will move to the left. Once the carriage is idle, carefully unpack the ink cartridges and remove the plastic tape from the ink cartridges. Make sure not to touch the copper-colored contacts or the ink nozzles. Press the ink cartridge into the slot and wait until it snaps into place. Close the cover on the ink cartridge slot to fix the ink cartridge into place. Close the lid. The slot for the color ink cartridge is on the left side and the black ink cartridge on the right. Close the ink cartridge access door. 


Now, print an alignment page. On your printer’s control panel, touch Setup followed by Tools. Then select Align Printer. Once the alignment page is printed, use it to align the ink cartridges. Open the scanner lid and place the alignment page on the scanner glass with the printed side facing down. Close the scanner lid and then press the OK button on the printer control panel. The printer will now align the ink cartridges.


After completing the hardware connections, you can install the printer software on your computer. Make sure not to connect the printer and computer until prompted. Go to the official HP website from your browser. Navigate to the Support page by choosing your region. Enter the printer model number and hit the Enter key. Click on the Download button next to the required software. Run the downloaded file and continue with the on-screen instructions to install the software. Once the HP Officejet 4650 setup has been done, print a test page to make sure that the setup is fine.

Popular posts from this blog

How to Setup HP LaserJet M234dwe Printer?

 HP LaserJet M234dwe is one of the most productive machines and has the fastest 2-sided printing. The high productive printer is most suitable for home-office use and can give a reliable performance for high-volume black & white printing.    Let us now see the setup process for the HP LaserJet M234dwe printer.   UNBOXING: The HP LaserJet M234dwe printer The HP Black LaserJet toner Setup poster Reference Guide and documentation sheets Power cord USB cable    HARDWARE SETUP Unpack the printer from the carton and place it on a flat surface. Make sure to keep the printer away from direct sunlight. Now, unpack the accessories from the carton and place them near the printer. Unpack the toner ink cartridge from the packaging, open the cartridge access door, and place the toner into the respective slot. Now, close the cartridge access door.   Open the paper tray cover from the bottom of the printer. Inside, slide the paper guide to the corners. Have a stac...
Read more

HP DESKJET 3752 SCAN TO COMPUTER

 123 HP Deskjet 3752 Scan to computer from the PC – Windows When scanning to a Windows PC, you can make use of the tools like HP Deskjet 3752 Scan Software , HP Solution Center Software, Windows Paint or Windows Scan. You have total control over the scan settings inside the software. Step 1: Placing the document Place the document on the scanner glass with the printed side facing down. Check if the scanner glass is clean before you place the document. Align the document properly with the engraved lines on the scanner glass to properly scan the whole document without cutting out anything. Close the scanner lid once you have placed the document properly to start scanning the document. Step 2: Scanning the document Click start, search for your HP Deskjet 3752 printer name and select it from the search results. Select the Scan a document or photo option. You need to select the file format in which you want the document to be saved, the scan quality, and the number of copies etc. before...
Read more

How To Reset Ink Cartridge HP 61?

Quick Steps To Reset HP 61 Ink Cartridge Open the access door of the cartridge. Wait until the carriage is moved to the center and remove the empty cartridge. Clean the electrical contacts of the printer using a lint-free cloth. Use the distilled water and wipe the internal parts of them to clear the ink residue. Re-insert the HP 61 ink cartridge back into the printer. Check the control panel of the printer for messages related to the ink cartridge. Perform a test print. Do a hard reset if the printer cannot identify the cartridge.
Read more