Printer Setup and Support

  UNBOXING AND SETUP- STEP-BY-STEP GUIDE In this step-by-step guide, we will take you through the process of unboxing and setting up your HP LaserJet Pro MFP M29w printer for the first time. Opening The Product Box Skip to the “Unpacking the printer” section if you have already opened the product box. Open the product box. Inside the box, you can find the toner cartridge (pre-installed), setup CD/ROM, a power cord, user guides, and the printer. Remove all the components and the printer from the box. Place the printer on a neat and stable surface and go to the next step of the HP LaserJet Pro MFP M29w setup . Unpacking The Printer Remove the printer from the Styrofoam pieces and the packing cover. Gently peel off all the packing tapes from the important parts of the printer. Raise the top cover of your printer. Take the pre-installed toner cartridge out of the printer. Remove the orange clips and the sealing tape from the cartridge. Place the unpacked toner cartridge back into the p...

 HP LaserJet Pro MFP M29W unboxing setup Are you looking forward for unboxing your new HP Laserjet Pro M29w printer? Just read and follow the upcoming instructions to set up your printer. Go through the steps here to carry out the HP LaserJet Pro MFP M29W unboxing setup. Take out the 123.hp.com/ljpm29w printer from its box. Open the access door of the cartridge and clear the packaging tapes from that area. Remove the toner cartridge and then take out the clips from it. Hold the sides of the toner cartridge and rock it in the forward and backward direction to distribute the toner. Pull the orange label to take out the sealing tape from it. Align the toner cartridge with the tracks in the 123.hp.com/ljpm29w printer and push it until it is properly seated. Close the toner cartridge access area. Load the plain papers in the input tray by pulling down the output tray. Pull out the input and output tray, and load a stack of plain paper in the input tray with the short end forward and th...