123.hp.com/oj4632 Setup
When you buy the printer for the first time you must follow certain procedures and guides to unload and setup the printer. Get your printer ready to print the documents.
Take away the printer from the box, and then unwrap all tape and packing material from the printer.
Take off the packing material from the scanner glass and the ink cartridge access lid.
Confirm that you take out all hardware and materials from the box before you dispose or recycle the box and packing material.
Plug the power cord into the HP OJ 4632 printer and set the preferences based on the convenience.
Drag the input tray, insert the paper into the tray and the close the input tray. If the tray is not fixed into the correct place, a 123.hp.com/oj4632 paper jam may occur.
Position the ink cartridge into its corresponding slot. Place the tri-color cartridge into the left slot and mount the black cartridge into the right slot.
Your printer calibrates and arranges the cartridge, once the alignment gets over, your printer prints an alignment page.
If the alignment page doesn’t print, then navigate to Setup -> Printer maintenance -> Align Printer. The printer prints an alignment page.
Click OK, and then discard or recycle the alignment page.
Download the upgraded software for the printer from our website and then 123.hp.com/setup 4632 the printing software according to the guidance.
Ensure that you do not link the printer to a computer until it is instructed.