Lexmark T650N Troubleshooting

Step 1: For the network connection, verify that the internal print server is installed correctly and the printer is connected to the network. You can also print a network setup page and make sure the status displays Connected. If the status displays as Not Connected, check for the network cables and print the network setup page again by using the Lexmark t650n troubleshooting solution.

Step 2: For the paper tray issue, check if the paper type setting matches with the paper loaded in the tray. View the Paper Type setting from the Paper menu from the printer’s control panel. Before proceeding to start a print job, specify the correct type setting. Choose the type from Print Properties for Windows and Print dialog for Macintosh.

Step 3: For paper jams, ensure the paper is placed properly by opening the paper tray. Check if there are any misfeeds or paper jams. Ensure that the paper guides are aligned at the edges of the paper. Check if the paper is closed correctly.

Step 4: You can also reset the printer by switching it off, waiting for about 10 seconds, and then switching it on.

Step 5: For print driver issue, verify that the printer driver is installed properly and the version is correct. Check for the recent updates. Check if the model number of the software matches the model number of the printer.

Step 6: In case of a cartridge issue, shake the cartridge well by removing it from the holder so that the ink or toner spreads evenly inside the cartridge. Now, install the cartridge again by following the procedure available on the Lexmark t650n troubleshooting manual.

Step 7: In printing documents, the print application may contain invalid data or a formatting error. Delete the print application and print it again. In the case of PDF documents, recreate the PDF and print it again.

Step 8: To change the page protect settings to Off, tap the icon on the printer’s control panel. Tap the arrow buttons until Settings displays and select the checkmark. Similarly, tap the arrow buttons and choose Settings > Setup Menu > Print Recovery > Page Protect > Off and place a checkmark on them.

Step 9: Verify that the ISP is securely attached to the printer system board and check whether the cable is connected securely to the correct connector.

Step 10: Check if the page that gets jammed reprints after you clear the jam by tapping the icon and choose the arrow buttons until Settings appears. Now, select any checkmark by marking on it. Select the arrow buttons and choose General Settings > Print Recovery > Jam Recovery and mark a tick on the checkbox. Finally, tap the On or Auto option by using the arrow buttons and enable it. Still you need more related information regarding the query of Lexmark t650n troubleshooting, then start to connect with our tech experts.

Popular posts from this blog

How to Setup HP LaserJet M234dwe Printer?

 HP LaserJet M234dwe is one of the most productive machines and has the fastest 2-sided printing. The high productive printer is most suitable for home-office use and can give a reliable performance for high-volume black & white printing.    Let us now see the setup process for the HP LaserJet M234dwe printer.   UNBOXING: The HP LaserJet M234dwe printer The HP Black LaserJet toner Setup poster Reference Guide and documentation sheets Power cord USB cable    HARDWARE SETUP Unpack the printer from the carton and place it on a flat surface. Make sure to keep the printer away from direct sunlight. Now, unpack the accessories from the carton and place them near the printer. Unpack the toner ink cartridge from the packaging, open the cartridge access door, and place the toner into the respective slot. Now, close the cartridge access door.   Open the paper tray cover from the bottom of the printer. Inside, slide the paper guide to the corners. Have a stac...
Read more

HP DESKJET 3752 SCAN TO COMPUTER

 123 HP Deskjet 3752 Scan to computer from the PC – Windows When scanning to a Windows PC, you can make use of the tools like HP Deskjet 3752 Scan Software , HP Solution Center Software, Windows Paint or Windows Scan. You have total control over the scan settings inside the software. Step 1: Placing the document Place the document on the scanner glass with the printed side facing down. Check if the scanner glass is clean before you place the document. Align the document properly with the engraved lines on the scanner glass to properly scan the whole document without cutting out anything. Close the scanner lid once you have placed the document properly to start scanning the document. Step 2: Scanning the document Click start, search for your HP Deskjet 3752 printer name and select it from the search results. Select the Scan a document or photo option. You need to select the file format in which you want the document to be saved, the scan quality, and the number of copies etc. before...
Read more

How To Reset Ink Cartridge HP 61?

Quick Steps To Reset HP 61 Ink Cartridge Open the access door of the cartridge. Wait until the carriage is moved to the center and remove the empty cartridge. Clean the electrical contacts of the printer using a lint-free cloth. Use the distilled water and wipe the internal parts of them to clear the ink residue. Re-insert the HP 61 ink cartridge back into the printer. Check the control panel of the printer for messages related to the ink cartridge. Perform a test print. Do a hard reset if the printer cannot identify the cartridge.
Read more