123 HP Officejet 3830 Printer Setup

The HP OfficeJet 3830 is a single function color printer with duplex, Wi-Fi, and network printing technologies. This particular HP printer is of a professional quality that gives out seamless printing options. Considering the mobile printing feature, they are way out of the chart and you can seamlessly print documents, photos, etc., from your smartphone, iPad, or any other device when it is connected to the same network.

 

We will now see the simple steps to set up the HP OfficeJet 3830 printer.

 

  1. Unbox the carton and take out the accessories provided along with the HP OfficeJet 3830 printer. Remove the protective tapes that are surrounding the printer.
  2. Take out the power cord from the sealed packaging and then connect it to the rear end of the printer. Connect the plug of the power cord to the power source. Then press the Power button located on the left side of the printer to turn on the printer. The printer’s control panel will light up when it is ready.
  3. Select the Language from the display and then press the OK button or the option.
  4. Raise the paper input tray from the back of the printer. While loading paper in the printer, make sure the stack of paper is aligned. Also, there should be no damages or cuts on the paper as it may cause printing problems. Make sure the edge guides are not holding the paper too tight. 
  5. Now, open the front access door of the HP OfficeJet printer to install the ink cartridges. Take out the cartridges from the sealed packaging, remove the protective tape covering the filament of the cartridge, and then insert the cartridges into their slots until you hear it click into place.
  6. Close the access door of the printer.

　

And now, you will have to download and install the HP OfficeJet 3830 printer driver from the Official HP Support page.

 

  1. Open the default browser on your computer and go to the official support page of your printer. Click the Software, Drivers and Firmware tab on the left side of the page. The driver page will open now. 
  2. Expand the driver option. Select the Operating System and its version from the drop-down list seen on the page.
  3. Download the printer driver from the recommended drivers list.
  4. Once you have downloaded the printer driver, perform a double-click on the driver installer and proceed with the installation.
  5. Follow the onscreen prompts and finally choose the type of connection from the list. Finally, print a test page to complete the HP Officejet 3830 printer setup.

 

Location: United States

Popular posts from this blog

How to Setup HP LaserJet M234dwe Printer?

 HP LaserJet M234dwe is one of the most productive machines and has the fastest 2-sided printing. The high productive printer is most suitable for home-office use and can give a reliable performance for high-volume black & white printing.    Let us now see the setup process for the HP LaserJet M234dwe printer.   UNBOXING: The HP LaserJet M234dwe printer The HP Black LaserJet toner Setup poster Reference Guide and documentation sheets Power cord USB cable    HARDWARE SETUP Unpack the printer from the carton and place it on a flat surface. Make sure to keep the printer away from direct sunlight. Now, unpack the accessories from the carton and place them near the printer. Unpack the toner ink cartridge from the packaging, open the cartridge access door, and place the toner into the respective slot. Now, close the cartridge access door.   Open the paper tray cover from the bottom of the printer. Inside, slide the paper guide to the corners. Have a stac...
Read more

HP DESKJET 3752 SCAN TO COMPUTER

 123 HP Deskjet 3752 Scan to computer from the PC – Windows When scanning to a Windows PC, you can make use of the tools like HP Deskjet 3752 Scan Software , HP Solution Center Software, Windows Paint or Windows Scan. You have total control over the scan settings inside the software. Step 1: Placing the document Place the document on the scanner glass with the printed side facing down. Check if the scanner glass is clean before you place the document. Align the document properly with the engraved lines on the scanner glass to properly scan the whole document without cutting out anything. Close the scanner lid once you have placed the document properly to start scanning the document. Step 2: Scanning the document Click start, search for your HP Deskjet 3752 printer name and select it from the search results. Select the Scan a document or photo option. You need to select the file format in which you want the document to be saved, the scan quality, and the number of copies etc. before...
Read more

How To Reset Ink Cartridge HP 61?

Quick Steps To Reset HP 61 Ink Cartridge Open the access door of the cartridge. Wait until the carriage is moved to the center and remove the empty cartridge. Clean the electrical contacts of the printer using a lint-free cloth. Use the distilled water and wipe the internal parts of them to clear the ink residue. Re-insert the HP 61 ink cartridge back into the printer. Check the control panel of the printer for messages related to the ink cartridge. Perform a test print. Do a hard reset if the printer cannot identify the cartridge.
Read more