Printer Setup and Support

HP Envy 4510 How to Copy Step 1 : Get Steps for HP Envy 4510 How to Copy? If you use a scanner glass as a base to copy, then keep the original item with the print side facing down the glass and close the scanner lid after aligning the width guides from your printer. Step 2 : Tap the copy icon from the home screen of the hp envy 4510 printer’s control panel and modify the copy settings as required. Step 3 : On the copy screen, swipe to choose the required number of copies or enter the number using the keypad icon. Step 4 : To access the advanced copy settings, tap the Settings icon and opt for the desired settings as provided in the upcoming steps for HP Envy 4510 How to Copy. Step 5 : For duplex copying, on the 2-sided option, select on/off as required. If you are performing 2-sided copy from the glass, then load the second page paper when prompted. Step 6 : Under Paper size and type, check if the paper loaded in the tray is matching with the size of pape...

Instant HP Envy 4510 Unboxing Setup Doing HP Envy 4510 Unboxing Setup is not a hard thing to do but you need to be slightly cautious while connecting it. By reading this document you will get an idea of what to do when you buy a new printer and make it function. Remove the sticky tapes that has been used to cover the printer box and take the printer outside. Find a clean and flat surface to place your printer. It can be a spacious table or a small desk too. The printer box should contain cables and power cord to connect it to the computer or laptop you use, two ink cartridges of black and a tri-color, an installation CD, a warranty card and a manual with instructions to connect and more. To check if you have received all the required components to set your printer, look at the list of contents at the side of the printer box and confirm. Go to the control panel display and remove the tape sticked if any. Now, let’s go to the connecting section of the printer...