Printer Setup and Support

The Quick Steps To Bring Back The Factory Settings On Your HP Printer Reset the printer to restore the default factory settings. Note that the language, tray size will remain the same. Go to the print queue and cancel the print jobs. Turn off the HP printer and remove the power cord. Leave the printer undisturbed for at least 30 seconds. Insert the power cord directly into an electrical outlet and switch it on. Press and hold Resume for 10-20 seconds, and the Attention light turns on. Unhold the Resume button and the product restores the factory setting.

Take the  new HP printer  out of the package. Make sure  to remove all the packing material from the printer. Use  the power cable that came with the printer to connect it to the computer. Switch on  the printer and the computer. Fill  the input tray with enough paper. Insert  the ink cartridges in the respective slot. Make sure  that your printer and computer are connected using Wi-Fi or wired network. Install  the printer driver and start printing.

After the printer is purchased, the initial step to be done is to install the driver. The procedure on how to install HP printer is listed below. Tear the seal and open the box. The CD to install the driver, manual which guides the users on how to use the printer is provided in it. Take the printer from the box and place it on a flat surface. Remove the tape present on it. Connect one end of the power cord at the rear of the printer and the other end to the wall outlet. Browse through the menu and choose your desired language. Select the name of your country or region and specify the date & time if prompted. Tap Yes to confirm your choice. A Welcome screen gets displays on the printer’s control panel. Load enough a stack of plain paper in the input tray. Insert the cartridge into its slot. After the alignment page gets printed, the setup process is complete.