Printer Setup and Support

 For Unboxing 123.hp.com/setup 8710, Separate the printer from the box, eliminate the packing materials from the box which comes with the printer. Grasp either side of the handles and access the ink cartridge access door till it fits into place to remove all the tapes and packing materials from inside the printer. The cartridge access door should be closed. Link the power cord to the back of your hp officejet pro 8710 printer, and then link the other end of the power cord into the electrical supply. Subsequently, power up the printer. Access the input tray to place the stack of unused paper with the proper width guides. Get access to the ink cartridge access door. You should touch only the black plastic on the ink cartridge until it placed properly. Subsequently, close the ink cartridge access door. After completing the installation of 123.hp.com/ojpro8710 , ink cartridges the printer prints an alignment page by itself. Best quality can be attained by aligning the ink cartridge. U...

  Unbox your newly purchased HP Officejet Pro 8710 Printer. Identify the areas covered by tape and remove it carefully. Thoroughly check if you have received all the components required to connect the printer. Plug the power cord’s ends into both the printer’s rear port and electrical power outlet. After turning on the HP Officejet Pro 8710 Printer Driver Setup with the Power button, swipe to the bottom of its control panel and set the date, time, language and region accordingly. HP OJPro8710 comes with two ink cartridges; take the orange tape out of it and insert them in their slots firmly. After installing the ink cartridges, load plain paper in the input tray so that the printer prints an alignment page. With the software CD provided by the manufacturer, install the driver for your printer. Wow! You gave a try to do it on your own. Enjoy the happiness of working with your 123.hp.com/ojpro8710 printer and get back if you face an issue while setting it up.