HP Laserjet Pro MFP M148DW Setup

Unboxing Setup

  • "Cut" the printer box's sealing tape with a box cutter and open box.
  • Remove the HP machine and other accessories from the box carefully.
  • The HP Laserjet Pro MFP M148DW setup accessories include the user guide, power cable, and a USB type-B cable.
  • An easy way to remove the machine from the box is to set the box on its side and pull the machine out by using the plastic handles.
  • "Remove" the styrofoam packing material from the M148DW printer and set the printer on a flat surface.
  • Unwrap the M148DW printer’s plastic bag and discard it.
  • The M148DW machine’s lids are secured by orange tapes.
  • Peel off all these tapes from the M148DW machine’s exterior and interior surfaces.
  • Remove the plastic film from the M148DW printer’s control panel.

Loading Paper

  • Lower the M148DW printer’s front cover and load a paper stack in the paper input tray.
  • Adjust the HP machine’s paper width guides to secure the paper stack.
  • Close the front cover.

Power Connection

  • Take the HP power cable out of the plastic bag and uncoil it.
  • Attach it to the rear power port of the HP Laserjet Pro MFP M148DW setup and the wall electrical outlet.
  • Press the M148DW machine’s Power button. It is located on the front side of the printer beside the front door.
  • Install the M148DW printer driver on your computer to complete the rest of the setup.

Popular posts from this blog

How to Setup HP LaserJet M234dwe Printer?

HP DESKJET 3752 SCAN TO COMPUTER

How To Reset Ink Cartridge HP 61?